| |
- Visit our Performance Chart to see how your vehicle performs using Ferox Fuel Additives
- Visit our Frequently Asked Questions .
- View our Documentation for Case Studies about Ferox Fuel Tablets
- Check out what our customers are saying about Ferox.
|
Contract All | Expand All
|
 How do I apply Ferox?
|
|
A. 1 tablet of Ferox High Performance Fuel Additive will treat up to
15 gallons of either gasoline or diesel fuel. Put the Ferox Gas
Saver tablet into the fuel tank before your fill up with fuel. By the
time you are finished filling up the fuel tank, the tablet will be
completely dissolved and mixed into the fuel.
|
|
How often should I use Ferox?
|
|
A. Being that Ferox Gas & Diesel Fuel Additive is a Catalyst and not
a Detergent it is safe to use with every fill-up. We recommended that
you consistently add Ferox Fuel Saver each time that you fill up.
Doing this will not only clean out your engine, it will also prevent
future carbon build-up. The more consistent you are, the more money
you'll save.
|
|
Will Ferox damage my Vehicle?
|
|
A. As long as Ferox Fuel Saver is used in the recommended dosages it
will never cause any damage to a vehicle. In fact, when used
correctly, Ferox High Performance Fuel Additive will extend the life
of an engine. All Ferox Fuel Additives are registered with the
Environmental Protection Agency, are test proven and are supported by
years of scientific data. Ferox gas saver is a non Octane Boost Fuel
Additive that acts much like a Horsepower Booster but is hundreds of
times safer.
|
|
Does Ferox work on Gas and Diesel Engines?
|
|
A. Ferox High Performance Fuel Additive works on the chemical level
of the combustion process and therefore works in exactly the same way
regardless of the type fuel in which it is used. Ferox Fuel Additive
is a Gas and Diesel Fuel Additive that acts like a Horsepower Booster.
|
|
How will I know Ferox is working?
|
|
A. There are a number of ways to know if Ferox Gas Saver is working,
but if you don't want to pull apart your engine or go to get an
emissions test every other month, a simple way is to track your fuel
mileage, both freeway and city driving. Improved fuel mileage has a
direct correlation with a cleaner engine, and a cleaner engine results
in fewer emissions. . Another easy way to see if it is working is to
check your oil. Due to less carbon blow by, your oil will stay cleaner
longer. The time it will take to notice a difference will depend on
the history of the vehicle, because some engines will have more
deposits than others. Ferox Gas & Diesel Fuel Additive is a catalyst
and will remove the deposits, but deposits don't just fall off over
night. It may take several full tanks of fuel before the Fuel Saver
begins to work. Each vehicle is different. We recommend consistent
use of Ferox High Performance Fuel Additive in order to completely
remove all deposits and keep them from coming back. Everyone should
notice a significant difference within 2,000 miles of driving with the
consistent use of Ferox gas saver. Ferox High Performance Additive is
better than using an Octane Boost Fuel Additive.
|
|
|
| Not Treated with Ferox |
Treated with Ferox |
 |
 |
|
Both engines were run for approximately 13,000 hrs.
One was treated with Ferox Fuel Additive and the other was not.
One of the most important reasons for using Ferox High Performance
Fuel Additive is that your engine will last longer. Deposits build up
in the engine and result in greater friction, causing excessive wear.
Ferox Fuel Additive is a catalyst, it will burn off any existing
carbon deposits leaving your engine free of the abrasive material.
Consistent use of Ferox Fuel Additive will also prevent new deposits
from being formed in their place. This catalytic action helps to
improve the life of the internal combustion engine, and reduces
maintenance costs. Ferox is both a gas additive and a diesel fuel
additive that you put into your fuel every time that you fill up. This
means your engine stays clean, the environment stays clean, and you
receive optimal engine performance, horsepower and fuel
efficiency with every mile of every day.
|
Because of the impurities in petroleum-based fuels, carbon deposits form along the surfaces of the combustion chamber, which will not combust at normal engine operating temperatures. These deposits are the problem. They are what cause your fuel mileage to drop over the life of your vehicle, they are what causes you to have to use higher octane fuels, they are the primary cause of automotive emissions that hurt the environment, they are what cause your motor oil to get dirty, they are what plugs up your fuel injectors, and they are what cause a decline in overall engine performance and power. As a Catalyst, Ferox High Performance Additive, lowers the Energy of Activation rate, which allows the carbon deposits to burn off at temperatures as low as 200ºC opposed to 600ºC. Ferox Fuel Additive is a gas additive and diesel fuel additive.
Ferox bonds to these impurities and deposits, and as a catalyst it allows a chemical reaction to happen at a temperature where it normally wouldn't happen. This chemical reaction allows the impurities to completely combust with the fuel, and the deposits burn also. This reaction is a horsepower booster that delivers more energy to the rear wheels.
 |
 |
|
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
